Transfer Press -mechanical- PLATARG 912

emplacement

Fabricant

numéro de la machine

Description

Platarg 912 ICOP Transfer Press 6.5" Stroke - 3.15" Max Part Length
* Strip and Release on the Stripper Forks
* 11 Stripper forks included
* Full Set of Bottom Cams with Kick up lever style
* Oil Cup Lube on Top Shaft
* Bijur Oiler Pump - Chain Drive, feeding all moving surfaces
* Counter Balance pneumatic cylinders on top
* Platarg 6" wide chopper - Bottom Shaft driven with cam
* Platarg Air Clutch & Brake - Like Minster set up
* Repaired transfer slide casting. Crack at mounting to press but Expertly repaired with steel plates, bolts and dowels.
* Tie Rod frame construction - rods on each side of top shaft
* Press is 9'3" tall without Counter Balances, 10'6" with Counter Balances. For Transport it can ship at 9'3" Tall.
* Press is on shop floor under power and can be inspected. Good working older Platarg.
* New 1968. Seller bought it new from Factory.Press Design
drive system:  eccentric / crank
number of suspensions:   12

état

année de construction

Machine sous tension